TD Bonnet Prop from John Redman

   As I said in the thread, there was a TD up from Florida at the 
show last week that had rubber props bolted to the toolbox, one in 
front on the right side and on the back on the left. I worked for 
an hour and a half yesterday making my copy of them. The 1st 
picture shows the left side, bonnet in notch. The 2nd shows the old 
prop stick (mahogany) on the tool box and the permanent one  behind 
it. I cut up the sole of an old Topsider shoe for the rubber and 
used a broken horn mount for backing. The props just miss 
contacting the bonnet in the down position and hold the edge above 
the toolbox by about a half inch.