Bonnet Prop from Brian Smith

Attached are a couple of pictures of my bonnet prop used on my 1950 MGTD. Saw this idea at a show a number of years ago and it is simple, works really well and is easily stored either on top of the tool box or directly behind it. The two cuts in the center of the wooden prop are to clear the two hinges on the top of the tool box, the outer cuts are just deep enough and just wide enough to allow the bonnet sides to slip in and stay securely but also not mark the paint. With this system you can open one side or both at a show or to work on the car.
Brian Smith
1950 MGTD #3376

Propped:     Bonnet up:



Bottom Side Top: